Author |
Message |
invariant
|
Posted: Tue May 17, 2016 11:26 am |
|
|
Site Admin |
|
Joined: Wed Jan 04, 2012 12:36 pm Posts: 1613 Location: Saskatoon
|
_________________ 2015 KTM 500 EXC 2008 KTM 990 Adventure S
|
|
|
|
|
Doug
|
Posted: Tue May 17, 2016 8:33 pm |
|
Joined: Mon Apr 15, 2013 8:04 am Posts: 484
|
Pretty awesome
|
|
|
|
|
Baroque_Ja
|
Posted: Tue May 17, 2016 11:12 pm |
|
Joined: Fri Apr 11, 2014 8:51 am Posts: 614
|
_________________ 2016 FE 501
|
|
|
|
|
Doug
|
Posted: Wed May 18, 2016 7:10 am |
|
Joined: Mon Apr 15, 2013 8:04 am Posts: 484
|
Pretty much where it ends Rob, mine has a yosh exhaust and a xcw map on it. The exhaust and map was on the bike when I bought it.
|
|
|
|
|
Baroque_Ja
|
Posted: Thu May 19, 2016 12:26 am |
|
Joined: Fri Apr 11, 2014 8:51 am Posts: 614
|
_________________ 2016 FE 501
|
|
|
|
|
Doug
|
Posted: Thu May 19, 2016 9:26 am |
|
Joined: Mon Apr 15, 2013 8:04 am Posts: 484
|
Next time you are out this way Rob, you will have to take it for a rip!
|
|
|
|
|
John0270
|
Posted: Thu May 19, 2016 10:37 pm |
|
Joined: Sun Apr 08, 2012 12:31 pm Posts: 357 Location: Swift Current
|
They are using Kymco motors??? Yuck! Why would they let anyone know that? That company makes knockoff quads ect that places like co-op try to sell at a slightly lower price than a real one, just without the parts and tech support.....
_________________ Klr 692 with 143'000 km on the clock 2017 v-strom xt 650!
|
|
|
|
|
Doug
|
Posted: Fri May 20, 2016 9:06 am |
|
Joined: Mon Apr 15, 2013 8:04 am Posts: 484
|
Never read that, but Kawasaki, Honda and bmw have used kymco motors in the past.
|
|
|
|
|
John0270
|
Posted: Fri May 20, 2016 3:26 pm |
|
Joined: Sun Apr 08, 2012 12:31 pm Posts: 357 Location: Swift Current
|
yeah for there kids items usually. cat and yamaha do the same thing. Yamaha won't admit/publish it but I know for a fact that they are using it in the viking sxs, as the castings and construction is similar to other kymco motors I have had appart. On those we experienced about a 10% crank failure rate. But the 700 twin kymco in the wildcat trail and sport has been sweet, but thats a plain bearing engine.
most of the jap stuff has been using nickle silicon bores. the kymco stuff has gone back to iron, but your not able to bore them oversize or re sleeve them. Its too bad as the companies who were re plating nickle silicon bores do an excellent job.
_________________ Klr 692 with 143'000 km on the clock 2017 v-strom xt 650!
|
|
|
|
|
kizmet
|
Posted: Mon May 30, 2016 2:59 pm |
|
Joined: Tue Jan 13, 2015 5:26 pm Posts: 165 Location: Regina
|
Hmm that 250exc would be perfect for the Mrs.! I was even talking to Alsport and they said that they made up, and safetied, a KTM Freeride for the street!
_________________ KTM 500EXC HONDA CRF450R HONDA 919 (HORNET 900)
|
|
|
|
|
|