Saskatchewan Dual Sport Club http://www.saskatchewandualsport.com/forum/ | |
Some single track I've been working on. http://www.saskatchewandualsport.com/forum/viewtopic.php?f=3&t=2185 |
Page 1 of 1 |
Author: | Baroque_Ja [ Sun Jun 25, 2017 11:44 pm ] |
Post subject: | Some single track I've been working on. |
This is a currently approx mile long single track loop I've been working on since last fall not far from home (Invariant helped quite a bit on a couple burn ins) Unfortunately camera cut off last quarter mile. I want to add another 2-3 miles so it will be the length of a proper harescramble. I have some stretches to connect to it that i've been bushwacking on foot. It's funny, you walk someting and think it will be easy to ride through and It's a whole other story. So many face slappers. The rain keeps coming and making everything overgrown and slick so it's not that clean of a run and I hit a few logs and things I could normally see. But in early fall it should be perfect. |
Author: | invariant [ Mon Jun 26, 2017 3:17 pm ] |
Post subject: | Re: Some single track I've been working on. |
That looks great Rob. Can't wait to try it. Maybe I'll bring my chainsaw and we'll speed some sections up |
Author: | bordenbmw [ Mon Jun 26, 2017 4:46 pm ] |
Post subject: | Re: Some single track I've been working on. |
Club fall ride maybe! Edit: Yep... you need a chain saw for the big bike LOL! |
Author: | Baroque_Ja [ Tue Jun 27, 2017 12:22 am ] |
Post subject: | Re: Some single track I've been working on. |
Author: | TimS [ Tue Jun 27, 2017 2:21 pm ] |
Post subject: | Re: Some single track I've been working on. |
Looks nice! |
Author: | Doug [ Sat Aug 19, 2017 8:58 am ] |
Post subject: | Re: Some single track I've been working on. |
There are guys out here in Idaho that have racks built on the forks of there ktm 350s, with a chainsaw mounted on it. Maybe that's your answer Rob. |
Author: | Baroque_Ja [ Wed Sep 06, 2017 11:13 am ] |
Post subject: | Re: Some single track I've been working on. |
Author: | Scratch [ Thu Sep 07, 2017 3:00 pm ] |
Post subject: | Re: Some single track I've been working on. |
http://www.trailtech.net/hard-parts/chainsaw-mount |
Author: | invariant [ Thu Sep 07, 2017 3:08 pm ] |
Post subject: | Re: Some single track I've been working on. |
low tech solution: |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |